22inch 120W 9-30V flood spot LED for jeep truck trailer car off road App control

FOB Reference Price:Get Latest Price
$20.00 - $60.00 / Pieces | 10 Piece/Pieces (Min. Order)
Report Suspicious Activity
Overview
Quick Details
Place of Origin:
Taiwan, Taiwan
Brand Name:
PA
Model Number:
PAS-5D-RGB
Warranty:
1 Years, 1 year
Certification:
RoHS
Voltage:
9-30V DC, 9-30V DC
LED:
40PCS*3W 22inch Combo
Size:
22 inch
Power:
120W
Control:
APP
Waterproof:
IP67 water
Lens:
5D lens
Material:
Diecast aluminum housing
Lamp Type:
LED
Car Make:
Cars
Type:
bar light
Supply Ability
Supply Ability:
2000 Piece/Pieces per Month
Packaging & Delivery
Packaging Details
Packing:
Box Size:93.5*30*31CM
4pcs/Box
Port
TAIWAN
Lead Time :
Shipped in 2 weeks after payment
Video Description

22inch 120W 9-30V flood spot LED for jeep truck trailer car off road App control

 

 

 

Technical Data:

  • LED Power:  120W
  • Operating Voltage: 9-30V DC  
  • Control:APP
  • 40PCS*3W 22inch Combo 
  • Waterproof rate: IP67 water 
  • Material: Diecast aluminum housing
  • Lens: 5D lens
  • Wire harness:12v 40A
  • Beam: Spot/ Flood/ Combo Beam
  • 30000 hours above life time  
  • Dimensions: 22 inch

Product Feature:

  • Low consumption: it can be work long time without start engine.

  • Wide operating voltage range: it can apply to different types of vehicles.

  • Long life: more than ordinary advanced LED light bulbs, more than 30000 hours life.

  • Aluminum casing, shock-proof waterproof better.

  • Light perception: a softer light to prevent glare.

  • 100% Waterproof and anti-corrosion: it can be used in rain or any other bad environment.

  • One year limited warranty.

Application:

  • LED work lights are widely applied to enhance lighting, eg. Vessels, Bus, Off-road vehicles, Trucks, Fire Engines, Forklifts, Mining, Trains, Tanks ATV, RV, etc.

Preliminary Steps:

  1. Read all instructions carefully and study diagrams before installing lights.

  2. Check with state and local authorities for laws governing usage and proper mounting of auxiliary lamps.

  3. Disconnect ground connection from battery (marked”-“) to avoid accidental short circuits before attempting to connect electrical wires

  4. Route new wires along existing wiring, Tape as necessary to correct slack.

  5. When running wires through the firewall, keep them away from moving parts

Mounting Lights:

  1.  Drill 8mm holes for screw placement on the surface where you would like to fix the light

  2.  Use the bolt to fasten the lamp, add the locking washer and tighten the bolt.

Wiring Instructions:

  1. Mount switch in a convenient location where it is easily reached from the driver’s seat.

  2. Wiring: White”+”,Black”-“.Attach the black wire with annular terminal to positive side”-“,white wire with annular terminal to negative side “+” on battery or ground. (Vehicles)

  3. Make sure the working voltage (DC12V/24V),choose the corresponding relays.

  4. Insert the lamp connector (A) to wring connector (B)

  5. Turn on the stitch to make sure if the lamp works, if not, please check carefully if the wiring installing correct.

Warning:

  1. Work under the specified voltage (DC10-30V)
  2. This light becomes hot under continuous use, Don’t remove or touch the casing for at least 30 minutes after turning the lamp off.
  3. Keep heat-sink clean and exposed to maintain air flow.

Safety Notes and Using (Please note the following safety notes to avoid malfunctions, damage or physical injury):

  1. It is not allowed to use the LED work light in vehicles in road traffic.If the work light is used in road traffic the operating license will expire.
  2. Only qualified personnel are allowed to work on electrical systems in vehicles. For installing the LED work light observe the regulations and safety instructions.
  3. Do not modify the LED work light in any way.
  4. Do not stare into the light beam. Do not use devices which can strongly focus light for viewing the light beam.
  5. If you have to drill holes into the vehicle structure for mounting the LED work light, make sure not to damage the surface of the vehicle, Make sure not to damage cables or supporting parts.
  6. Tighten all screws after adjustment and frequently inspect the unit to make sure that it is securely attached.
  7. Do not expose the LED work light to oil. grease, dust/dirt. extreme temperatures strong vibrations and mechanical stress.
  8. Do not continue to use the work light if the unit becomes damaged, Repair work must be done by a qualified service technician.
  9. Do not lead the power cord around sharp corners or over hot surfaces.
  10. To avoid danger of fire and personal injuries, operate the work light only with the protective cover in place and replace a broken cover immediately.

 

About Us

  Per-Accurate Inc. is a professional LED BULB MANUFACTURER from Taiwan for decade, we have 2 factories in Dongguan China, and Taiwan respectively. Please feel free to contact us if any question about our products.

 

 

 

 

 

 

 

    

You May Like
Not exactly what you want? 1 request, multiple quotations Get Quotations Now >>
You May Like